how to camera care dirt


Dirt is everywhere! Its in the air, her under our feet, and too often on her (and) our cameras. While the dirt out of the camera is not a problem (except the lens of course), its potential has dirt in your camera that is the problem. Dirt in a camera can make moving parts, damage mirrors, plug the electronic contact points, get into the film, and respected by digital sensors.

The best course of action to deal with the dirt in your camera is avoided. The vast majority of shooting situations, does not cause problems with dirt from the unit. However, certain situations are recipes for trouble. Beaches, deserts, racing, motocross, marshes and other areas are subject to more dust and dirt that use everyday. To protect your camera is preferable to use a rain cape for camera. Hoods of rain vinyl / plastic bags for cameras targeted to achieve greater control of the camera, while protecting the device against environmental conditions. You can buy these at your favorite store or make your own camera with a large zip bag. To make your own by cutting a hole for the camera lens in one side of the bag and use to end zip to get their hands thank you for the controls. You should carefully secure the bag to the camera lens with tape or rubber band. Be sure to use a bag big enough to allow movement of the target, if you use a camera-type SLR.

Another time, the dirt is in a camera during lens changes and load the film. If you're not careful when changing lenses or film loading a lot of airborne dust / dirt can enter the camera body. To minimize dust when changing the objective to turn the camera down and press the camera lens. This prevents dust from falling into the camera body. When the film changes, hold the camera horizontally, instead of leaning forward.

0 comments:

Post a Comment